July 31, 2010  
Register   Login  
 
ForumsIJCA Forums  
IJCA Forums Minimize
Forums > General Interest > Maintenance Topics
Subject:  Stemhead Fitting
Prev Next
You are not authorized to post a reply.

Author Messages
Stephen Bushe
Posts:2
12/10/2009 7:29 AM  
I need to replace the origional "Stemhead Fitting" on my J-24. I would like to know where I can purchase a new fitting.
Bryan Wutzke
Posts:30
12/10/2009 1:39 PM  
Stephen,

Try Waterline... looks like they have the stemhead advertised online... http://www.waterlinesystems.net/servlet/the-324/Stemhead-Tang-%28J24%29/Detail

Good luck,

Bryan Wutzke
#3801 - Maybe
Excelsior, MN
Bill Barnfield
Posts:7
12/10/2009 4:48 PM  
I recently bought one from Waterline. It was about $150.00 I think. Note that the holes and angles may not line up with your old one. The angle was pretty easy to bend to fit. But I had to glass over the old holes and drill new ones down the front of the bow. The 2 holes on the deck matched ok. Hope this helps!
Stephen Bushe
Posts:2
12/10/2009 9:28 PM  
Thanks for the info. Will contact them shortly.
You are not authorized to post a reply.
Forums > General Interest > Maintenance Topics > Stemhead Fitting


ActiveForums 3.7
 
Print  
 
Copyright 2010 by IJCA Terms Of UsePrivacy Statement